True Causes
← lobby
Why do parts that passed inspection come back?
tap any completed stage to explore it
✓
Generate
✓
Clarify
✓
Cluster
✓
Select
✓
Structure
✓
Map
7
Actions
walkthrough · not counted
anyone with the link · listed publicly · federation on
30 people · 27 ideas · 2 groups
Logic → · record
THE QUESTION

Why do parts that passed inspection come back?

Does one influence the other? Three quarters of the votes cast decide.

closed · back to Actions
Viewing as guest. Enter a handle to join and take part.
Questions are shared out between groups, so you get the ones your group was given — not all 180.
why
Nobody could answer several hundred pairs. Each pair goes to one group; a pair that splits is then referred to other groups, so it can appear in your list later even though it started elsewhere. The settled count includes every group's work, which is why it climbs faster than your own list shrinks.
176 / 180 settled 0 for you to answer
Last tally: 176 decided · 1 escalated to cross-group panels · 0 contested · 3 below quorum — panels need at least max(2, 75% of panel) votes cast; your smallest panel has 15 members.
close ✕
The customer's returns log and ours do not match → influences? → Tool wear is judged by ear
Nothing said yet.
Completed phase — the record of pairs and votes stands above.Logic sidecar ↗
Batch traceability ends at the door→Temperature in the shop swings fifteen degrees between morning and afternoonopendiscuss
…→Deburring is done by whoever is freeopen escalateddiscuss
Setup sheets are in the setter's head, not on paper→New jobs are quoted from the last similar job, not from the drawingopendiscuss
Maintenance is done when a machine stops→The customer's returns log and ours do not matchopendiscuss
Rework is not counted anywhere→Quotes are won on price, so cycle times are cut to the bone✓ yesdiscuss
Customers changed their inspection method and never told us→Operators are paid on parts per hour✓ yesdiscuss
Customers changed their inspection method and never told us→Coolant is changed when it smells, not on a schedule✓ yesdiscuss
Quotes are won on price, so cycle times are cut to the bone→The oldest machine makes the tightest-tolerance part✓ yesdiscuss
Quotes are won on price, so cycle times are cut to the bone→Operators are paid on parts per hour✓ yesdiscuss
The same operator runs the same machine for years and nobody checks the settings→The drawing on the floor is not the revision the customer ordered✓ yesdiscuss
Tool wear is judged by ear→Deburring is done by whoever is free✓ yesdiscuss
Deburring is done by whoever is free→Parts that pass our inspection fail the customer's✓ yesdiscuss
Parts that pass our inspection fail the customer's→The customer's returns log and ours do not match✓ yesdiscuss
Deburring is done by whoever is free→The customer's returns log and ours do not match✓ inferreddiscuss
Quotes are won on price, so cycle times are cut to the bone→Coolant is changed when it smells, not on a schedule✗ nodiscuss
Temperature in the shop swings fifteen degrees between morning and afternoon→Quotes are won on price, so cycle times are cut to the bone✗ nodiscuss
Coolant is changed when it smells, not on a schedule→Quotes are won on price, so cycle times are cut to the bone✗ nodiscuss
The same operator runs the same machine for years and nobody checks the settings→Temperature in the shop swings fifteen degrees between morning and afternoon✗ nodiscuss
Rework is not counted anywhere→Temperature in the shop swings fifteen degrees between morning and afternoon✗ nodiscuss
Rework is not counted anywhere→Customers changed their inspection method and never told us✗ nodiscuss
The drawing on the floor is not the revision the customer ordered→The same operator runs the same machine for years and nobody checks the settings✗ nodiscuss
The drawing on the floor is not the revision the customer ordered→The oldest machine makes the tightest-tolerance part✗ nodiscuss
The drawing on the floor is not the revision the customer ordered→Coolant is changed when it smells, not on a schedule✗ nodiscuss
The drawing on the floor is not the revision the customer ordered→Batch traceability ends at the door✗ nodiscuss
Customers changed their inspection method and never told us→The oldest machine makes the tightest-tolerance part✗ nodiscuss
Coolant is changed when it smells, not on a schedule→Customers changed their inspection method and never told us✗ nodiscuss
The same operator runs the same machine for years and nobody checks the settings→Quotes are won on price, so cycle times are cut to the bone✗ nodiscuss
Rework is not counted anywhere→The oldest machine makes the tightest-tolerance part✗ nodiscuss
Temperature in the shop swings fifteen degrees between morning and afternoon→Operators are paid on parts per hour✗ nodiscuss
The same operator runs the same machine for years and nobody checks the settings→Operators are paid on parts per hour✗ nodiscuss
Batch traceability ends at the door→Quotes are won on price, so cycle times are cut to the bone✗ nodiscuss
The drawing on the floor is not the revision the customer ordered→Customers changed their inspection method and never told us✗ nodiscuss
Quotes are won on price, so cycle times are cut to the bone→Customers changed their inspection method and never told us✗ nodiscuss
Temperature in the shop swings fifteen degrees between morning and afternoon→The oldest machine makes the tightest-tolerance part✗ nodiscuss
Rework is not counted anywhere→Batch traceability ends at the door✗ nodiscuss
The oldest machine makes the tightest-tolerance part→Temperature in the shop swings fifteen degrees between morning and afternoon✗ nodiscuss
Coolant is changed when it smells, not on a schedule→The oldest machine makes the tightest-tolerance part✗ nodiscuss
Operators are paid on parts per hour→The drawing on the floor is not the revision the customer ordered✗ nodiscuss
The drawing on the floor is not the revision the customer ordered→Quotes are won on price, so cycle times are cut to the bone✗ nodiscuss
Customers changed their inspection method and never told us→The drawing on the floor is not the revision the customer ordered✗ nodiscuss
Quotes are won on price, so cycle times are cut to the bone→Rework is not counted anywhere✗ nodiscuss
Customers changed their inspection method and never told us→Rework is not counted anywhere✗ nodiscuss
Quotes are won on price, so cycle times are cut to the bone→Batch traceability ends at the door✗ nodiscuss
The drawing on the floor is not the revision the customer ordered→Rework is not counted anywhere✗ nodiscuss
Operators are paid on parts per hour→Rework is not counted anywhere✗ nodiscuss
The oldest machine makes the tightest-tolerance part→Coolant is changed when it smells, not on a schedule✗ nodiscuss
Coolant is changed when it smells, not on a schedule→Batch traceability ends at the door✗ nodiscuss
Customers changed their inspection method and never told us→Temperature in the shop swings fifteen degrees between morning and afternoon✗ nodiscuss
Customers changed their inspection method and never told us→Batch traceability ends at the door✗ nodiscuss
Temperature in the shop swings fifteen degrees between morning and afternoon→Batch traceability ends at the door✗ nodiscuss
Temperature in the shop swings fifteen degrees between morning and afternoon→Coolant is changed when it smells, not on a schedule✗ nodiscuss
Batch traceability ends at the door→The oldest machine makes the tightest-tolerance part✗ nodiscuss
Coolant is changed when it smells, not on a schedule→Rework is not counted anywhere✗ nodiscuss
The oldest machine makes the tightest-tolerance part→The same operator runs the same machine for years and nobody checks the settings✗ nodiscuss
Operators are paid on parts per hour→Temperature in the shop swings fifteen degrees between morning and afternoon✗ nodiscuss
The same operator runs the same machine for years and nobody checks the settings→Customers changed their inspection method and never told us✗ nodiscuss
Batch traceability ends at the door→Coolant is changed when it smells, not on a schedule✗ nodiscuss
Operators are paid on parts per hour→Customers changed their inspection method and never told us✗ nodiscuss
Batch traceability ends at the door→Customers changed their inspection method and never told us✗ nodiscuss
Rework is not counted anywhere→The drawing on the floor is not the revision the customer ordered✗ nodiscuss
Operators are paid on parts per hour→The oldest machine makes the tightest-tolerance part✗ nodiscuss
Operators are paid on parts per hour→The same operator runs the same machine for years and nobody checks the settings✗ nodiscuss
The oldest machine makes the tightest-tolerance part→Rework is not counted anywhere✗ nodiscuss
Temperature in the shop swings fifteen degrees between morning and afternoon→The same operator runs the same machine for years and nobody checks the settings✗ nodiscuss
Batch traceability ends at the door→Operators are paid on parts per hour✗ nodiscuss
Temperature in the shop swings fifteen degrees between morning and afternoon→Customers changed their inspection method and never told us✗ nodiscuss
Coolant is changed when it smells, not on a schedule→The drawing on the floor is not the revision the customer ordered✗ nodiscuss
Operators are paid on parts per hour→Batch traceability ends at the door✗ nodiscuss
The oldest machine makes the tightest-tolerance part→Operators are paid on parts per hour✗ nodiscuss
Quotes are won on price, so cycle times are cut to the bone→The drawing on the floor is not the revision the customer ordered✗ nodiscuss
The oldest machine makes the tightest-tolerance part→The drawing on the floor is not the revision the customer ordered✗ nodiscuss
Temperature in the shop swings fifteen degrees between morning and afternoon→Rework is not counted anywhere✗ nodiscuss
Operators are paid on parts per hour→Quotes are won on price, so cycle times are cut to the bone✗ nodiscuss
The oldest machine makes the tightest-tolerance part→Quotes are won on price, so cycle times are cut to the bone✗ nodiscuss
The oldest machine makes the tightest-tolerance part→Batch traceability ends at the door✗ nodiscuss
Rework is not counted anywhere→Operators are paid on parts per hour✗ nodiscuss
Coolant is changed when it smells, not on a schedule→Temperature in the shop swings fifteen degrees between morning and afternoon✗ nodiscuss
The same operator runs the same machine for years and nobody checks the settings→Batch traceability ends at the door✗ nodiscuss
Coolant is changed when it smells, not on a schedule→The same operator runs the same machine for years and nobody checks the settings✗ nodiscuss
Quotes are won on price, so cycle times are cut to the bone→Temperature in the shop swings fifteen degrees between morning and afternoon✗ nodiscuss
The same operator runs the same machine for years and nobody checks the settings→Rework is not counted anywhere✗ nodiscuss
Customers changed their inspection method and never told us→The same operator runs the same machine for years and nobody checks the settings✗ nodiscuss
Rework is not counted anywhere→Coolant is changed when it smells, not on a schedule✗ nodiscuss
Rework is not counted anywhere→The same operator runs the same machine for years and nobody checks the settings✗ nodiscuss
The drawing on the floor is not the revision the customer ordered→Operators are paid on parts per hour✗ nodiscuss
The same operator runs the same machine for years and nobody checks the settings→The oldest machine makes the tightest-tolerance part✗ nodiscuss
Operators are paid on parts per hour→Coolant is changed when it smells, not on a schedule✗ nodiscuss
The same operator runs the same machine for years and nobody checks the settings→Coolant is changed when it smells, not on a schedule✗ nodiscuss
The oldest machine makes the tightest-tolerance part→Customers changed their inspection method and never told us✗ nodiscuss
Batch traceability ends at the door→The same operator runs the same machine for years and nobody checks the settings✗ nodiscuss
The drawing on the floor is not the revision the customer ordered→Temperature in the shop swings fifteen degrees between morning and afternoon✗ nodiscuss
Coolant is changed when it smells, not on a schedule→Operators are paid on parts per hour✗ nodiscuss
Customers changed their inspection method and never told us→Quotes are won on price, so cycle times are cut to the bone✗ nodiscuss
Temperature in the shop swings fifteen degrees between morning and afternoon→The drawing on the floor is not the revision the customer ordered✗ nodiscuss
Batch traceability ends at the door→Rework is not counted anywhere✗ nodiscuss
Batch traceability ends at the door→The drawing on the floor is not the revision the customer ordered✗ nodiscuss
Quotes are won on price, so cycle times are cut to the bone→The same operator runs the same machine for years and nobody checks the settings✗ nodiscuss
Deburring is done by whoever is free→Setup sheets are in the setter's head, not on paper✗ nodiscuss
Deburring is done by whoever is free→First-off inspection is skipped when the job is late✗ nodiscuss
New jobs are quoted from the last similar job, not from the drawing→First-off inspection is skipped when the job is late✗ nodiscuss
Deburring is done by whoever is free→…✗ nodiscuss
First-off inspection is skipped when the job is late→…✗ nodiscuss
The customer's returns log and ours do not match→…✗ nodiscuss
Setup sheets are in the setter's head, not on paper→Maintenance is done when a machine stops✗ nodiscuss
…→…✗ nodiscuss
Maintenance is done when a machine stops→Deburring is done by whoever is free✗ nodiscuss
The customer's returns log and ours do not match→Maintenance is done when a machine stops✗ nodiscuss
Setup sheets are in the setter's head, not on paper→…✗ nodiscuss
Deburring is done by whoever is free→Tool wear is judged by ear✗ nodiscuss
…→Parts that pass our inspection fail the customer's✗ nodiscuss
Tool wear is judged by ear→New jobs are quoted from the last similar job, not from the drawing✗ nodiscuss
New jobs are quoted from the last similar job, not from the drawing→…✗ nodiscuss
The customer's returns log and ours do not match→First-off inspection is skipped when the job is late✗ nodiscuss
…→New jobs are quoted from the last similar job, not from the drawing✗ nodiscuss
Setup sheets are in the setter's head, not on paper→Tool wear is judged by ear✗ nodiscuss
The customer's returns log and ours do not match→Parts that pass our inspection fail the customer's✗ nodiscuss
Parts that pass our inspection fail the customer's→Deburring is done by whoever is free✗ nodiscuss
Tool wear is judged by ear→Maintenance is done when a machine stops✗ nodiscuss
…→Tool wear is judged by ear✗ nodiscuss
First-off inspection is skipped when the job is late→Deburring is done by whoever is free✗ nodiscuss
…→The customer's returns log and ours do not match✗ nodiscuss
Tool wear is judged by ear→Parts that pass our inspection fail the customer's✗ nodiscuss
The customer's returns log and ours do not match→Tool wear is judged by ear✗ noin focus ↑ · close ✕
Tool wear is judged by ear→…✗ nodiscuss
Maintenance is done when a machine stops→Setup sheets are in the setter's head, not on paper✗ nodiscuss
First-off inspection is skipped when the job is late→Maintenance is done when a machine stops✗ nodiscuss
The customer's returns log and ours do not match→Deburring is done by whoever is free✗ nodiscuss
Parts that pass our inspection fail the customer's→Tool wear is judged by ear✗ nodiscuss
Parts that pass our inspection fail the customer's→Setup sheets are in the setter's head, not on paper✗ nodiscuss
The customer's returns log and ours do not match→Setup sheets are in the setter's head, not on paper✗ nodiscuss
Setup sheets are in the setter's head, not on paper→Deburring is done by whoever is free✗ nodiscuss
Parts that pass our inspection fail the customer's→Maintenance is done when a machine stops✗ nodiscuss
First-off inspection is skipped when the job is late→Parts that pass our inspection fail the customer's✗ nodiscuss
The customer's returns log and ours do not match→…✗ nodiscuss
Tool wear is judged by ear→Setup sheets are in the setter's head, not on paper✗ nodiscuss
Maintenance is done when a machine stops→First-off inspection is skipped when the job is late✗ nodiscuss
…→Setup sheets are in the setter's head, not on paper✗ nodiscuss
Setup sheets are in the setter's head, not on paper→Parts that pass our inspection fail the customer's✗ nodiscuss
Deburring is done by whoever is free→…✗ nodiscuss
…→Maintenance is done when a machine stops✗ nodiscuss
Maintenance is done when a machine stops→Tool wear is judged by ear✗ nodiscuss
New jobs are quoted from the last similar job, not from the drawing→Deburring is done by whoever is free✗ nodiscuss
Tool wear is judged by ear→The customer's returns log and ours do not match✗ nodiscuss
Deburring is done by whoever is free→Maintenance is done when a machine stops✗ nodiscuss
New jobs are quoted from the last similar job, not from the drawing→Parts that pass our inspection fail the customer's✗ nodiscuss
Parts that pass our inspection fail the customer's→New jobs are quoted from the last similar job, not from the drawing✗ nodiscuss
The customer's returns log and ours do not match→New jobs are quoted from the last similar job, not from the drawing✗ nodiscuss
…→Setup sheets are in the setter's head, not on paper✗ nodiscuss
First-off inspection is skipped when the job is late→New jobs are quoted from the last similar job, not from the drawing✗ nodiscuss
…→Maintenance is done when a machine stops✗ nodiscuss
Parts that pass our inspection fail the customer's→…✗ nodiscuss
First-off inspection is skipped when the job is late→Setup sheets are in the setter's head, not on paper✗ nodiscuss
…→…✗ nodiscuss
New jobs are quoted from the last similar job, not from the drawing→Setup sheets are in the setter's head, not on paper✗ nodiscuss
New jobs are quoted from the last similar job, not from the drawing→Tool wear is judged by ear✗ nodiscuss
Maintenance is done when a machine stops→Parts that pass our inspection fail the customer's✗ nodiscuss
First-off inspection is skipped when the job is late→The customer's returns log and ours do not match✗ nodiscuss
Maintenance is done when a machine stops→New jobs are quoted from the last similar job, not from the drawing✗ nodiscuss
Maintenance is done when a machine stops→…✗ nodiscuss
First-off inspection is skipped when the job is late→Tool wear is judged by ear✗ nodiscuss
New jobs are quoted from the last similar job, not from the drawing→…✗ nodiscuss
…→Tool wear is judged by ear✗ nodiscuss
Deburring is done by whoever is free→New jobs are quoted from the last similar job, not from the drawing✗ nodiscuss
Parts that pass our inspection fail the customer's→First-off inspection is skipped when the job is late✗ nodiscuss
…→First-off inspection is skipped when the job is late✗ nodiscuss
…→First-off inspection is skipped when the job is late✗ nodiscuss
…→Parts that pass our inspection fail the customer's✗ nodiscuss
Setup sheets are in the setter's head, not on paper→First-off inspection is skipped when the job is late✗ nodiscuss
First-off inspection is skipped when the job is late→…✗ nodiscuss
Tool wear is judged by ear→…✗ nodiscuss
New jobs are quoted from the last similar job, not from the drawing→The customer's returns log and ours do not match✗ nodiscuss
Tool wear is judged by ear→First-off inspection is skipped when the job is late✗ nodiscuss
…→The customer's returns log and ours do not match✗ nodiscuss
…→Deburring is done by whoever is free✗ nodiscuss
Setup sheets are in the setter's head, not on paper→…✗ nodiscuss
…→New jobs are quoted from the last similar job, not from the drawing✗ nodiscuss
Setup sheets are in the setter's head, not on paper→The customer's returns log and ours do not match✗ nodiscuss
New jobs are quoted from the last similar job, not from the drawing→Maintenance is done when a machine stops✗ nodiscuss
Maintenance is done when a machine stops→…✗ nodiscuss
Parts that pass our inspection fail the customer's→…✗ nodiscuss